適用于寬頻帶、高精度的電流測量
● 適用于EV、HEV等電動汽車的1000A大電流測量
● 1000A額定下,可用于其它型號不能使用的-30~85°C的環境中
● 振幅精度±0.06%,相位精度±0.2°C的高性能
● 寬頻帶DC~20kHz的頻率特性
● 太陽能發的、燃料電池評估等,可用于測量電池的充放電和變頻器的輸出側
● 使用示波器或存儲記錄儀等儀器,可監測波形(和9555-10配合)
基本參數
額定輸入電流 | AC/DC 1000A |
---|---|
輸入電流 | AC/DC 1200A(1800Apeak連續,100Hz以下,40°C以下,其它需要降低額定值范圍以下) |
頻率特性 | 振幅:DC~20kHz, 位相: DC~1kHz |
振幅/相位精度 | DC (±0.05% rdg. ±0.01% f.s. ,無相位規定) 16Hz ≤ f ≤ 66Hz (±0.05% rdg. ±0.01% f.s. , ±0.2°) 20kHz以下規定振幅,1kHz以下規定相位 |
消耗功率 | 7VA以下(測量1000A/55Hz,±12V電源時) |
輸出電壓率 | 2V/額定電流值※儀器的輸出通過傳感器單元9555-10輸出AC+DC電壓。請連接1MΩ等的搞輸入阻抗電壓輸入儀器。 |
對地間額定電壓 | AC/DC1000V(50/60Hz,CATⅢ) |
可測導體直徑 | φ36 mm以下 |
使用溫濕度范圍 | -30°C~+85°C, 80% rh以下(不凝結) |
電源電壓 | DC ±11 V~±15 V (通過傳感器單元9555-10供電, 9555-10為AC100~240V) |
體積及重量 | 160W × 112H × 50Dmm, 980g,線長3m |
附件 | 說明書×1,標識帶×6 |
注:連接示波器或存儲記錄儀為鉗式傳感器供電。
9555-10 基本參數 (電源供應)
適用機型 | 9270, 9271, 9272, 9272-10, 9277, 9278, 9279, 9709, CT6862, CT6863, 一個單元 |
---|---|
輸出 | BNC 接口,傳感器的輸出信號 |
功率消耗 | AC 轉換器9418-15, AC 100 ~ 240V, 50/60Hz, 20VA Max. |
體積及重量 | 42mm W × 82mm H × 132mmD, 600g |
附件 | AC 轉換器9418-15 × 1 |
Basic parameters
Rated input current AC/DC 1000A
Maximum input current AC/DC 1200A (1800Apeak continuous, below 100Hz, below 40°C, other needs to be below the rated range)
Frequency characteristics Amplitude: DC ~ 20kHz, Phase: DC ~ 1kHz
Amplitude/phase accuracy DC (±0.05% rdg. ±0.01% f.s., no phase specification)
16Hz ≤ f ≤ 66Hz (±0.05% rdg. ±0.01% f.s., ±0.2°)
Amplitude below 20 kHz, phase specified below 1 kHz
Power consumption below 7VA (when measuring 1000A/55Hz, ±12V power supply)
Output voltage rate 2V / rated current value ※ The output of the instrument outputs AC + DC voltage through the sensor unit 9555-10. Please connect the input impedance voltage input device such as 1MΩ.
Maximum rated voltage between ground AC/DC1000V (50/60Hz, CATIII)
Measured conductor diameter φ36 mm or less
Use temperature and humidity range -30 ° C ~ +85 ° C, below 80% rh (non-condensing)
Power supply voltage DC ±11 V~±15 V (powered by sensor unit 9555-10, 9555-10 is AC100~240V)
Volume and weight 160W × 112H × 50Dmm, 980g, line length 3m
Accessories Manual × 1, logo tape × 6
Note: Connect the oscilloscope or memory logger to power the caliper sensor.
9555-10 Basic parameters (power supply)
Applicable models 9270, 9271, 9272, 9272-10, 9277, 9278, 9279, 9709, CT6862, CT6863, one unit
Output BNC interface, sensor output signal
Power consumption AC converter 9418-15, AC 100 ~ 240V, 50/60Hz, 20VA Max.
Volume and weight 42mm W × 82mm H × 132mmD, 600g
Accessories AC Converter 9418-15 × 1