德國REMO-HSE高壓電源

德國REMO-HSE高壓電源

德國埃弗茲液壓Evertz Hydrotechnik閥門

Valves (standard program)

瑞士ISLIKER MAGNETE AG電磁閥

意大利伊力威Eliwell加熱、制冷、濕度、壓力數顯電子溫控器 遠程集中控制系統

產品系列：

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

1. The EWCM series of Eliwell controllers manages compressor units and guarantees higher efficiency and advanced management of energy saving.

2. EWCM4120-4150-4180		EWCM8400/8600/8900
   EWCM9100		EWCM9900

3. Series: CLASSIC
   EWCM400	EWCM800S	EWCM809 NH3	EWCM900

4. The EWDR products line, available in size 4 DIN modules (70x85mm), is specially designed for applications with DIN rail mounted controllers, such as switchboards for cold rooms or, for applications with centralized switchboards.

5. EWDR981		EWDR983 LX /S/C
   EWDR984		EWDR985 LX /S/C/K

6. IC Series are devices with single or double stage depending on the model. Outputs are dependent or independent, with Neutral Zone and are used for temperature, pressure and humidity applications.
7.  

8. IC901	IC901A	IC902	IC902SA
   IC912	IC912A	IC915	IC915 °R
   IC917 PID	IC961
   EVIS Compatible Series
   IC912LX	IC912LX °R	IC915LX	IC915LX Diff.
   IC915A LX	IC917LX	IC974LX

9. ID controllers are suitable for applications on refrigeration units at normal or low temperature. The LX models are evis system compatible.
10.  
11.  

12. ID961	ID961 PLUS	ID970	ID971
    ID971 PLUS	ID974	ID974 PLUS	ID981
    ID985
    EVIS Compatible
    ID961LX	ID970LX	ID971LX	ID974LX
    ID975LX	ID983LX	ID985LX	IS972-IS974LX EWEM

13. Model IWC, with a size of 37x180 mm, is a multifunctional controller that integrates in a single compact device both the control logic and the power relays, thus enabling the direct management of loads with a maximum power of 2hp. The extended keyboard and the user interface with menus enable to directly access all the available functions, thus making the use of IWC extremely simple and intuitive.

14. IWC720-730		IWC720-730 Open		IWC 740-750
    IWC740-750 Comm Line		IWC750 Twin

15. IWP / IWK Series

16. The Split is composed from a power board IWP and a remote keyboard IWK, available in various formats.
    The boards IWP offer to a wide phantom of configuration possibility machine, thanks above all to the large variety of relays, available with powers up to 2HP for the management of two compressors with delayed activation, but also to the considerable variety of I/O lines that render easily adaptable the board IWP for applications on switchboards.

17.  

18. IWP family
    IWP740		IWP750LX		IWP760LX
    IWK family
    IWK 32x74		IWK Open		IWK Wide

19. The WM product lines are made up of 2 groups:
    1) Fan speed regulators: are fan automatic regulators suitable for conditioning usage.
    2) Temperature Controllers: are electronic temperature controllers with a single-point for cold or warm control setting.

20. Fan speed regulators
    WM203		WM253
    Temperature Controllers
    WM961-961A		WM971

21. EWRC series is made up of 2 macro groups:
    1) EWRC 300LX - 500LX are controllers for static and dynamic cold rooms with single-phase compressors up to 2 HP for on-board installation. They have 3 or 5 outputs on configurable relays, for controlling all the room's accessory users.
    2) EWRC 550LX - 800LX are controllers with advanced operational features for applications with double compartment cold rooms, with temperature and humidity control, fan speed control and serial connection for synchronized defrosting management and the installation of a remote keyboard.
22.  

23. EWRC300LX		EWRC500LX
    EWRC550LX		EWRC800LX

24. EWHT800 and EWHT1800 series are controllers with advanced operational features for applications with double compartment cold rooms, with temperature, humidity, and fan speed control for the management of curing and drying processes.
25.  

26. EWHT800LX		EWHT1800LX

27. Compatibility with the major components in the existing market
28. Availability of several models for the various application requirements
29. Customizable refrigerant table
30. Starter KIT availability for easy installation start up
31. Configuration Software Device Manager for parameters setup, real time view and data recording
32. The use of electronic expansion valves in commercial and industrial refrigeration has introduced a high-precision, stable and reliable control of the flow of refrigerant with an ensuing increase in efficiency.
    Indeed, the electronic expansion valve is controlled by a driver, which regulates its opening according tothe performance levels required by the system and under all operating conditions, guaranteeing minimal overheating in a time frame that optimises the performance of the compressor group and increases the benefits of floating point condensation.
    The complete solution Eliwell offers is flexible and consists of two elements: the V800 driver for electronic expansion valve and the ID985/V electronic controller

33.  

34. Technical

35. Brochures, instructions and download

36. The thermoregulators of Universal Controllers EW48, EW72 e DR4000 series are ideal for all industrial applications requiring high precision temperature control, ranging from the molding of plastic materials and packaging to the control of raw materials transformation processes.
     

37. Controllers 48x48
    	EW4820      EW4821      EW4822
    Controllers 72x72
    	EW7210    EW7220      EW7221      EW7222
    Controllers DIN Rail
    	DR4010      DR4020      DR4021      DR4022

38. Anti-legionnaires function with daily programming: The ECH 985 lets you program automatic daily activation of the anti-legionnaires function to prevent the bacteria that cause legionnaires disease from developing inside the water tank
39. Timer function: Daily programming of storage cylinder water temperature. Programmed water temperature control only during certain time bands to limit energy consumption.
40. Party function: Manual control of temperature controller. The party function lets you activate the controller outside the normal time bands defined by the timer function.
41. The ECH 985 is a controller for single circuit and single compressor water-air and water-water heat pumps used in domestic hot water applications.
42.  

43. Technical

44. Size: 32x74 mm (for panel mounting with 71x29mm drilling template)
45. Display: LED - 3 and a half characters with sign
46. Analog inputs: 3 NTC analog inputs
47. Digital outputs: 4 relay outputs, all with configurable parameters
48. Power supply: 12Vac
49. Anti-Legionnaires function: Dedicated parameters for programming daily and weekly activation of the anti-legionnaires function.
    Timer function:  Dedicated parameters for programming daily and weeklycontroller functioning.
50. Energy Flex family is a range of compact devices with advanced functions and innovative applications for the HVAC market.

51. ST500		ST700
    SB600		SC600		SD600
    SBW600		SCW600		SDW600
    ACCESSORIES
    SKW22

52. The Fan Coils family is made up of 4 groups:
    1) FC Basic: it is the best answer to systems requiring functionality, low costs and technological innovation in one control unit.
    2) FC Basicom (PWM): they are 2 families of universal thermostats designed for use in a network with evis or Modbus protocol.
    3) FC Basicstat: it offers a simple but efficient solution for the control of fan coils.
    4) FC Plus: it is a family of universal thermostat designed to control valves with on-off actuators, electrical heaters and fan.
53.  

54. FC Basic		FC Basicom/Basicom PWM
    FC Basicstat		FC Plus

55. The digital timers of the EWTS family are the ideal solution for all applications that require an accurate control of manufacturing processes and the management of specific functions at regular intervals of time. The EWTS990 LP version is developed for application that use 2 ovens at the same time and where we decide to limit the maximum power used.
56.  

57. EWTS950-990LX		EWTS990 LP

58. EWTV products line are modules to which, in a evis system, we have to connect the probes for the acquisition of the temperature values.
     

59. EWTV200		EWTV240
    EWTV270		EWTV280

60. 
     
61. Fasec Series
62. Fasec family is made up of 3 groups:
    1) Fasec 33/43: they are designed for speed control and are particularly suited for applications on refrigeration units for the condensation function.
    2) Fasec 53: it is a manual fan regulator suitable for applications on refrigeration units.
    3) Fasec 1Kw/5Kw: they are automatic fan regulators suitable for applications on refrigeration units for both evaporation and condensation.
     

63. Fasec 33		Fasec43
    Fasec 53		Fasec 1Kw-5Kw

64. Single Phase Fan Speed Controllers
65. CFS family are optional modules which allow for speed regulation of fan with asynchronous single-phase motors.
     

66. CF -11		CFS Drivers

67. Powerful, easy to use and cost-effective;
68. Complete management of network controller alarms;
69. More than 12-months data logging capacity;
70. Wide range of models to fit all application requirements;
71. Graphs and tables printed on built-in printer;

72. Memory1000, with his extended range of model, combines the capabilities of a monitoring system with the ease-of-use of a data logger covering all customer application requirements. All models have a wide graphic display and easy-to-understand, intuitive multilingual (in 15 languages) menu for device configuration.
    The device features up to 10 analogue and digital inputs which can be expanded by linking the device, via a RS-485 port, to a network of up to 15 compatible Eliwell evis controllers. Controllers can also be connected using RadioAdapter wireless modules in order to create a cable-free plant monitoring system.

73.  

74. Eliwell's new programmable platform
    	free STUDIO
    	free BODY
    	free BODY: free Smart	free BODY: free Evolution

75.  
76. free Way is designed to  meet scustomers’ needs by reducing “time to market” for new products and also for  integrating new functions ; thereby  ensuring that  manufacturers of HVAC/R units and system integrators can fulfill their customer requirements in a timely manner 
    
    The new Eliwell programmable solution consists of a software suite free Studio, a complete range of programmable controllers free Smart & free Evolution, user terminal and a set of accessories.
    Key accessories are the Plug-in communication modules which facilitate  integration with Building Management systems in the residential, commercial and industrial end-user applications.
77. Downloads
78.  

79. link	document type	language
    Free WAY brochure CT122965 rel.03/10 IT	brochure	IT
    free WAY brochure CT122966 rel.03/10 EN	brochure	EN
    free WAY brochure CT122967 rel.03/10 DE	brochure	DE

80. Programmability using standard languages and compliant with IEC61131
81. Modularity and flexibility using a powerful CPU based on Flash technology and a substantial memory
82. Full control through a graphical display
83. Connectivity through RS485 and RS232 ports
84. Solid technology ensured by the robust plastic housing

85. Energy XT PRO is a series of programmable and easily customised controllers for the HVAC/R market. With over ten years’ experience in the design of standard products for the market and customised products for leading companies in the sector, Eliwell offers a series of products designed to meet all application needs. The controller allows customers to become independent, develops their own control software and protects their individual technical knowledge.

86.  

87. Technical

88. Bases: maximum 38 inputs and 24 outputs between analogue and digital
89. Bases: extended range of probes connctable to the inputs
90. Keyboards: 2 keyboards available (EXTU and EXTK)
91. Expansions: maximum 12 inputs and 17 output between analogue and digital
92. Connectable to supervision systems using MODBUS protocol

93. Designed using the most advanced hardware and software technologies and equipped with a 16 bit microprocessor with flash technology, the Energy XT PRO guarantees maximum performance and output that are capable of meeting the market’s increasing demands.
    The Energy XT PRO has been designed to offer a series of models with varying numbers of inputs and outputs so that Eliwell can always offer our customers the best solution.
    By connecting a base unit to external expansion modules (maximum of 4), the number of inputs and outputs obtained will be sufficient for even the most complex of applications.

94.  WebAdapter
95. 
96. Requires no software or add-on for the proper functioning of the system
97. To access the controller need only a personal computer with a network connection and an Internet browser (eg Internet Explorer)
98. The family of devices WebAdapter allows the connection of an electronic controller, to a TCP / IP network via Ethernet or WiFi.
    The devices of theWebAdapter family includes a web server that allows, through web pages, to display the status of the controller and change the parameters.
99.  

100. Technical

101. web pages easy to navigate and understand
102. access to web pages is protected by password
103. The user interface consists of a series of web pages easy to navigate and understand.
     Access to websites are password protected with two levels of access pre-configured.
     The device is particularly useful as a tool for configuring the controllers. Allows auditors to apply a configuration available on file or directly in the memory of WebAdapter.
104. 
      
105. Wide Application Range
106. High Reliability
107. Minimum Pressure Drop
108. Low Leakage Risk
109. UL Approved

110. The 4-way Reversing Valve is the key component to provide Heating and Cooling from the system to the air conditioned space by reversing the flow direction of refrigerant.
     It is used at room air conditioners, packaged and central air conditioners.
     The reversing Valves are designed for Heat Pump Systems with capacity from 3kW to 580kW.
     They are suitable for most refrigerants as R407C - R410A - R134A.

111. O Pressure Controls
112. The instruments of the O series are single (O16-O52) or dual (O17) mechanical pressure switches for high and low pressure with unipolar SPDT switch, which closes and opens when the pressure increases or decreases.
      

     O16 - O52		O17

113. G Pressure Controls 

The G60/63 range of pressure cut-outs is designed to protect refrigeration systems against critical conditions by setting high or low pressure limits.
The G60 low pressure cut-out protects the compressor against low suction pressures where there is a danger of liquid refrigerant entering the compressor and causing damage.
The G63 high pressure cut-out protects the system against excessive discharge pressure which can be dangerous and cause expensive equipment damage.

1. RSD Pressure Controls 

• Durable and Compact Fixed Pressure Controls designed to offer exceptional, long-lasting solutions for the most demanding HVAC and Refrigeration systems.
• High and Low Pressure Protection;
• Compact, light-weight and High Accuracy

The new Ranco range of electromechanical pressure switches with fixed setting are compact, light and easy to install. They are designed to protect refrigeration systems against critical conditions by setting high or low pressure limits. The range comprises of three series of models: HC (for high currents) and HR, both with automatic reset, and HL with manual reset. The stainless-steel control element is designed to guarantee an enhanced product life-cycle, with high performance. The container should ensure IP67 protection rating.
Thanks to the new construction technology, Ranco pressure switches offer the best solutions for applications in both Refrigeration and Air Conditioning.

1) Temperature Probes: Thanks to the different materials used in the different models, the temperature probes are capable of covering a very wide temperature range; the sensors used are PTC, NTC, thermocouple, Pt100 and Pt1000. The range of use depends on the materials used, as well as on the type of sensor.
2) Humidity Probes: The EWHS series of probes are specially made for connection to humidity measurement instruments. EWHS 280 and EWHS 300 probes have one current output (4...20 mA) proportional to the relative humidity. EWHS 310 probes have two current outputs (0...20 mA), one for humidity and one for temperature.
3) Pressure Probes: The EWPA series of probes are pressure reading devices; they have one 4...20mA current output for transferring the signal to the measuring instrument.

TEMPERATURE PROBES
NTC		Pt100		Pt1000
PTC		TcJ - TcK
HUMIDITY PROBES				PRESSURE PROBES
EWHS280		EWHS300-310		EWPA

Linear solenoids

The product range of ISLIKER MAGNETE includes solenoid actuators, rotary solenoids, retaining-, permanent retaining solenoids as well as stepping solenoids and custom solenoids upon customer requirement.

We welcome the opportunity to discuss your specific design requirements with you. The following checklist supports us in our discussion.

	Miniatur solenoid (D-Frame)	Small solenoid	Economy solenoid	Industrial solenoid	Tubular solenoids
	The open frame solenoid provides a efficient solution to most applications where life and performance are not the prime concerns.	A single hole fixing, long life small linear Solenoid available in either push or pull, double or return stroke versions for highest demands.	A long life economical solenoid in push and pull version.	Linear industrial solenoid for heavy work, long life, available in either push or pull, double- or return stroke versions.	A single hole fixing, long life, linear solenoid available in pull version for limited space applications.
Dimensions	□ 11 / 7.5 bis □ 40 / 36	Ø 20 – 32	□ 32/32 □ 40/40 □ 50/50 □ 60/60 □ 70/70	Ø 40 - 170	Ø 12,7 - 23
Preferred rated voltage	24 VDC	24 VDC	24 VDC / 230 VAC	24 VDC / 230 VAC	6, 12, 24 VDC
Max. rated voltage	48 VDC	48 VDC	230 VAC	230 VAC	48 VDC
Stroke	3 - 10 mm	3 – 9 mm	6 – 20 mm	8 – 50 mm	- 10 mm
Force	0.2 - 32 N	1.2 – 28 N	6 – 190 N	10 – 1600 N	0.02 – 7 N
Protection classification	IP 00	IP 20	IP 00 – IP 20	IP 20 – IP 65	IP 00

Self-holding solenoids

The product range of ISLIKER MAGNETE includes solenoid actuators, rotary solenoids, retaining-, permanent retaining solenoids as well as stepping solenoids and custom solenoids upon customer requirement.

We welcome the opportunity to discuss your specific design requirements with you. The following checklist supports us in our discussion.
 

	Self-holding solenoid	Bi-stable self-holding solenoid
	Open frame solenoid with one discreet position maintained without the continuous application of current.	Open frame return stroke solenoid for highest demands. Two discreet positions maintained without the continuous application of current.
Dimensions	□ 11 / 7.5 bis □ 30 / 27	□ 18 / 22 □ 25 / 25
Preferred rated voltage	24 VDC	24 VDC
Max. rated voltage	48 VDC	24 VDC
Stroke	3 - 8 mm	4 - 6 mm
Holding Force	0.02 - 20 N	6 - 27 N
Permanent holding force	3 - 35 N	12 - 20 N
Protection classification	IP 00	IP 00

Rotary solenoids

The product range of ISLIKER MAGNETE includes solenoid actuators, rotary solenoids, retaining-, permanent retaining solenoids as well as stepping solenoids and custom solenoids upon customer requirement.

We welcome the opportunity to discuss your specific design requirements with you. The following checklist supports us in our discussion.

	Rotary solenoids
	Compact rotary solenoid without axial movement of axis on request with return spring assembly free adjustable.
Dimensions	□ 35 / 35 □ 50 / 50 □ 75 / 75
Preferred rated voltage	24 VDC
Max. rated voltage	230 VAC
Rotary angle	0° - 95°
Torque	0.5 - 65 Ncm
Protection classification	IP 20

Electro magnets

The product range of ISLIKER MAGNETE includes solenoid actuators, rotary solenoids, retaining-, permanent retaining solenoids as well as stepping solenoids and custom solenoids upon customer requirement.

We welcome the opportunity to discuss your specific design requirements with you. The following checklist supports us in our discussion.

	Electro magnet	Permanent Electro magnet
	Electro magnet with a holding force, maintained by continuous application of current	Electro magnet with a holding force, maintained without the continuous application of current.
Dimensions	Ø 25 - 130	Ø 20 - 30
Preferred rated voltage	24 VDC	24 VDC
Max. rated voltage	230 VAC ab Ø 60	48 VDC
Force	160 - 6200 N	-
Permanent holding force	-	70 - 130 N
Protection classification	IP 20 - IP 65	IP 20

In partnership with our customers we set our focus on a price/performance related solenoid solution. We are your strong and reliable partner for compley integrated solenoid systems who will help you reach your goal swiftly. Custom solenoid assemblies or entire solenoid solutions eliminate trouble to maintain multiple vendors and additional inventory. It also eliminates your added cost and added manufacturing resources.   We welcome the opportunity to discuss your specific design requirements with you. The following checklistsupports us in  our discussion.

Custom solenoids Retaining solenoid in textile industry Feeding mechanism in supply module for SMT-placement system Clamp solenoid for IC production Adjustement element in air humidfilter Lock for automatic sliding doors Solenoid to press self-adhesive label

Applications
 

Power engineering
In the field of low- and middle switchgear equipment stroke- and selfholding type solenoids find manifold applications being used to release low-voltage, over-voltage or working current. ISLIKER solenoids must meet the requirements regarding force, on time response and the partly high mechanical vibration fatigue limit which are most important in this field of applications.

Mechanical engineering
ISLIKER solenoids are used as energy converters from electric to mechanical power in various designs as operating, switch or control components. The spectrum of applications ranges from small sensing solenoids via locking solenoids for fire-proof doors to fabric selection in weaving machines and highspeed actuator in assorting assemblies. The optimum utilization of the usually restricted construction space in order to achieve a set power level is one of the priority objectives of ISLIKER solenoids..

2/2-way directional valves, cartridge type block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.: DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar Opening pressure: 2,5 bar

2/2-way directional valves, cartridge type with cover, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar Opening pressure: 2,5 bar

2/2-way directional check valves, block-mounted
&wrap= | &md5=eeaab071d428eac5b4635d7a92277bc6','thePicture','width=400,height=300,status=0,menubar=0'); return false;" target=thePicture> Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.: DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure:350  bar  Opening pressure: 4)2,5 bar

2/2-way directional check valves with cover, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar  Opening pressure: 4) 2,5 bar

Pilot-operated check valves, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.: DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar  Opening pressure: 4) 2,5 bar

Pilot-operated check valves with cover, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar  Opening pressure: 4) 2,5 bar

Pilot-operated pressure relief valves with cover, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 32 (other diam. on request) Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar  Pressure setting: 4) 15 to 350 bar

Directly controlled pressure relief valves with cover, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 32 (other diam. on request) Pressure setting:4) 15 to 350 bar

Proportional pressure reducing valve, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 32 (other diam. on request) Pressure setting:4) 15 to 350 bar

Pilot-operated pressure reducing valves with cover, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 32 (other diam. on request) Pressure setting:4) 15 to 350 bar

Pressure-reducing valve, directly operated, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 32 (other diam. on request) Pressure setting:4) 15 to 350 bar

Proportional pressure reducing valve, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 32 (other diam. on request) Pressure setting:4) 15 to 350 bar

2/2-way directional valves, cartridge type, with cover and pilot valve, block-mounted; normally open
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.: 1) : DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar Voltage: 3) 24 V DC

2/2-way directional valves, cartridge type, with cover and pilot valve block-mounted; normally closed
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.: DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar Voltage: 3) 24 V DC

3/2-way directional pilot valves, directly controlled, panel-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.: DN 6, DN 10  Max. operating pressure: 350 bar (400 bar) Voltage: 3) 24 V DC Input: 31 W, 55 W

3/2-way directional pilot valves, pneumatically controlled, panel-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Control media: Air (24 V DC, 8 W) Nom. dia: DN 16, DN 25 Max. operating pressure: 350 bar (400 bar)

Valves, panel-mounted or as single valves
Directional valves (2/2 way; 3/2 way; 4/2 way; 4/3 way; ...) shut-off, pressure, flow or power regulating functions Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 6 to DN 50 Max. operating pressure: 350 bar

Pressure-compensated manual shut-off valves, valve spindle carried in ball bearing, with or without electrical/visual position indicator, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia:1) DN 16 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar

Motor operated shut-off valves with electrical/visual position indicator, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 50 to DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure: 350 bar

Accumulator shut-off valves with or without mechanical locking feature, with or without electrical/visual position indicator, block-mounted
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nominal diameters:1)  DN 40 bis DN 250 Mounting: To DIN 24342 (DN 16 to DN 100) Max. operating pressure:  350 bar

Descaling valves
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:2) DN 32 to DN 250 Max. operating pressure:4) 350 bar Voltage:3) 24 V DC

Accumulator shut-off valve /Descaling valve combinations
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 32 to DN 250 Max. operating pressure: 350 bar

Valve blocks for your specific requirements
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia.:1) DN 16 to DN 250 Max. operating pressure: 350 bar (400 bar)

2/2-way inline valves
Media: Water, water-oil emulsions, hydraulic fluid, aggressive media Nom. dia: DN 50 to DN 300 Opening pressure:4) 2,5 bar Voltage:3) 24 V DC

Pump unloading valves
Media: water; water-oil emulsions Nominal diameters: DN 20 to DN 63 Opening pressure:4) 400 bar Voltage:3) 24 V DC

1) On the basic of a tailored body design, these valves can be adapted to a given mounting configuration.

2) Various control capabilities and a tailored body design allow these valves to be adapted to any given configuration.

3) Other voltages on request.

4) Other pressure ratings on request.

產品系列：