進口潛水軸流泵美國潛水軸流泵

進口潛水軸流泵美國潛水軸流泵

進口潛水軸流泵技術參數：

流量：350-46800m3/h
揚程：1.5-20m
口徑：500-1600
轉速：245-1450、2900
功率：22-1400kw
電壓：380V、600V、6KV、10KV
介質溫度：50℃

進口潛水軸流泵工作原理：

是傳統的水泵電動機組的更新?lián)Q代產品，驅動水泵的電動機是干式全封閉潛水三相異步電動機，該型潛水電泵可*浸入水中運行。具有傳統機組一系列*的優點。

（1）由于電機與水泵構成一體，現場安裝方便、快捷，同傳統機組相比可節約95%安裝時間。

（2）由于電機潛入水中運行，電機冷卻條件好，泵站內無高溫，噪音低，可建成地下泵站，保持地面環境風貌，大大簡化泵站的土工及建筑結構工程，減少安裝面積，節約工程造價30-40%

（3檢測信號集中反饋于電控柜的監控器內，操作方便，易于實現自動控制及遠傳控制。

進口潛水軸流泵特點：

軸流泵在零流量時的軸功率zui大，因此泵在啟動前必須先打開排出管路上的閥，以減小啟動功率。軸流泵主要適用于低揚程、大流量的場合，如灌溉、排澇、船塢排水、運河船閘的水位調節，或用作電廠大型循環水泵。揚程較高的軸流泵可供淺水船舶的噴水推進之用。

進口潛水軸流泵美國泰樂TYLER售后服務：

*的服務鑄就*的企業讓客戶無后顧之憂。
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。

Imported submersible axial flow pump

Technical parameters of imported submersible axial flow pump:

Flow: 350-46800m3/h

Lift: 1.5-20m

Caliber: 500-1600

Speed: 245-1450, 2900

Power: 22-1400kw

Voltage: 380V, 600V, 6KV, 10KV

Medium temperature: 50

Working principle of imported submersible axial flow pump:

Is the traditional water pump motor group replacement products, drive the pump motor is dry full closed submersible three-phase asynchronous motor, the submersible pump can be immersed in water for a long time to run. With a series of incomparable advantages of traditional units.

(1) because of the integration of the motor and the pump, the installation is convenient and fast, and it can save the installation time by 95% compared with the traditional unit.

(2) because the motor run in the water, cooling conditions, pump station without high temperature, low noise, can be built underground pumping station, maintain the ground environment, greatly simplifying the geotechnical and structural engineering of pumping station, reducing installation area, save the project cost 30-40%

(3 detection signal feedback on the monitor in centralized control cabinet, convenient operation, easy to realize automatic control and remote control.

Imported submersible axial flow pump:

Axial flow pump at zero flow when the shaft power is the largest, so the pump must be opened before the start of the discharge pipe on the valve to reduce the starting power. Axial flow pump is mainly used in low lift and large flow situations, such as water, irrigation and drainage, drainage, dock canal lock regulation, or as power plant circulating water pump. Axial flow pump with high lift can be used for water jet propulsion of shallow water ship.

The United States imported submersible axial flow pump of tylosin TYLER customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.

進口潛水軸流泵guan網：http://www.twvalve。。ｎｅｔ/html/2288.html