進口先導活塞式氣體減壓閥
德國巴赫進口先導活塞式氣體減壓閥概述：
進口先導活塞式氣體減壓閥屬于先導活塞式減壓閥。由主閥和導閥兩部分組成。主閥主要由閥座、主閥盤、活塞、缸套、彈簧等零件組成。導閥主要由閥座、閥瓣、膜片、彈簧、調節彈簧等零件組成。通過調節彈簧壓力設定出口壓力，利用膜片傳感出口壓力變化，通過導閥啟閉驅動活塞調節主閥節流部位過流面積的大小，實現減壓穩壓功能。
Inlet pilot piston type gas pressure reducing valve
Introduction of Bach inlet pilot piston gas pressure reducing valve:
Import pilot piston type gas pressure reducing valve belongs to the pilot piston type pressure reducing valve. By the main valve and pilot valve composed of two parts. The main valve mainly by the valve seat, the main valve plate, piston, cylinder liner, springs and other parts. Pilot valve is mainly composed of valve seat, valve disc, diaphragm, spring, adjusting spring and other parts. By adjusting the spring pressure to set the outlet pressure, the diaphragm pressure sensor is used to adjust the flow area of the throttle part of the main valve through the pilot valve opening and closing to drive the piston.
進口先導活塞式氣體減壓閥的定義：
本產品主要用于氣體管路，如空氣、氮?dú)?、氧氣、氫氣、液化氣、天然氣等氣體。
Definition of inlet pilot piston gas pressure reducing valve:
This product is mainly used in gas pipelines, such as air, nitrogen, oxygen, hydrogen, liquefied petroleum gas, natural gas and other gases.
進口先導活塞式氣體減壓閥技術參數：
產品名稱 | 驅動方式 | 連接形式 | 結構形式 | 密封結構 | 壓力范圍 | 公稱通徑 | 常用材質 | 產品型號 |
進口先導活塞式氣體減壓閥 |
自動 |
法蘭 |
先導活塞式 | NBR、PTFE、硬密封 |
1.6-16.0MPa |
DN15-500 |
鑄鋼、不銹鋼 |
bach-a |
閥門尺寸標準
| 閥門試驗標準
| 閥門交貨標準
| 工業閥門標準
| 法蘭閥門標準
| 焊接閥門標準
| 對夾式連接閥
| 內螺紋連接閥
| 可以提供美國 |
DIN EN558-2005
| DIN EN12266-1-2003
| DIN3230-2-1974
| DIN EN 1171-2003
| DIN EN 3202-1977
| DIN EN 3202-1982
| DIN EN 3202-1979
| DIN EN 3202-1977
| API、ANSI等標準
|
進口先導活塞式氣體減壓閥guan網：http://www.twvalve。。ｎｅｔ/html/3894.html
采購中心
