進口大流量齒輪泵｜進口齒輪泵

進口大流量齒輪泵美國大流量齒輪泵

進口大流量齒輪泵產品概述：

大流量齒輪油泵適用于輸送不含固體顆粒和纖維，無腐蝕性，溫度不高于80℃，粘度為5×10-6～1.5×10-3m2/s (5-00cSt)的潤滑油或性質類似潤滑油的其他液體。

進口大流量齒輪油泵應用范圍
在輸油系統中可用作傳輸、增壓泵；
在燃油系統中可用作輸送、加壓、噴射的燃油泵； 

在一切工業領域中，均可作潤滑油泵用。 進口大流量齒輪油泵結構特點
進口大流量齒輪泵主要有齒輪、軸、泵體、安全閥、軸端密封所組成。齒輪經熱處理有較高的硬度和強度，與軸一同安裝在可更換的軸套內運轉。泵內全部零件的潤滑均在泵工作時利用輸出介質而自動達到。

進口大流量齒輪泵內有設計合理的泄油和回油槽，是齒輪在工作中承受的扭矩力zui小，因此軸承負荷小，磨損小，泵效率高。 
泵設有安全閥作為超載保護，安全閥的全回流壓力為泵額定排除壓力的1.5倍，也可在允許排出壓力范圍內根據實際需要另外調整。但注意本安全閥不能作減壓閥的*工作，需要時可在管路上另行安裝。 從主軸外伸端向泵看，為順時針旋轉。

進口大流量齒輪泵主要參數：

流量：72-570m3/h 排出壓力：0.6MPa  口徑：150-350mm
必需汽蝕余量：7-8m  效率：43-44%  轉速：740-990r/min
功率：37-250kw 電壓：220/380V  材質：鑄鐵、不銹鋼

美國泰樂TYLER的服務目標：

用戶*，信譽*，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Import large flow gear pump large flow gear pump

Overview of imported large flow gear pump products:

High flow gear pump for conveying solid particles and fiber, non corrosive, temperature is not higher than 80 DEG C, the viscosity is 5 * 10-6 to 1.5 * 10-3m2/s (5-00cSt) and other liquid lubricating oil or lubricating oil of similar nature.

Application range of imported high flow gear pump

It can be used as transmission and booster pump;

Can be used as fuel pump conveying, pressure, injection in the fuel system;

In all industrial fields, can be used for lubricating oil pump. Structural features of imported large flow gear pump

Imported large flow gear pump is mainly composed of gear, shaft, pump body, safety valve, shaft end seal. A higher gear after heat treatment the hardness and strength, together with the shaft installed in the sleeve can be replaced within the operation. All parts of the pump are lubricated by the output medium while the pump is working.

Imported high flow gear pump has reasonable design of the oil and the oil return groove is a gear in the work under minimum torque force, so the bearing load is small, small abrasion, high pump efficiency.  

The pump is equipped with a safety valve for overload protection, and the full return pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump. But note that the safety valve can not be used for long-term work, the need to be installed on the pipeline. Overhang from the spindle to the pump, for clockwise rotation.

Main parameters of imported large flow gear pump:

Flow: 72-570m3/h discharge pressure: 0.6MPa caliber: 150-350mm

Required cavitation: 7-8m efficiency: 43-44% speed: 740-990r/min

Power: 37-250kw voltage: 220/380V material: cast iron, stainless steel

The United States Taylor TYLER service goal:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.