詳細介紹
功率分析儀附件
模擬輸入/輸出
ADI40 40通道模擬量<>數字量I / O接口
ADI40功率分析儀40通道IO接口
所述ADI40延伸N4L高精度功率分析儀(PPA3500,PPA4500和PPA5500)的通用性,收集DC測量的多個并數字流數據到功率分析儀。具有4x直接熱電偶輸入(J型或k型),16x模擬直流輸入和20x模擬直流輸出。模擬輸出可以映射到任何PPA測量參數以及16x模擬輸入。更多關于ADI40的詳細信息可以在這里找到
參數細節
精度為0.1%FS
直流輸入16
溫度輸出4(J型或K型)
直流輸出20
電壓范圍+/- 10V
更新率10ms
兼容的功率分析儀的規格數據
PPA3500 ADI40_Brochure
PPA4500
PPA5500
電流測量
N4L LEM-6接口
N4L LEM-6接口作為一個高準確度,高穩定性的接口單元,其允許簡單的“即插即用”的LEM IT和ITN電流傳感器任何N4L PPA的連接。
LEM-6為LEM傳感器提供高度穩定的隔離電源電壓。每個通道有4次電流分流,范圍從1Ω?10Ω,這確保了變送器可以在整個動態范圍內使用,而不會在測量中引入噪聲。
如果LEM-6采用N4L功率分析儀和LEM傳感器購買,LEM-6接口可以在N4L的ISO17025 UKAS實驗室內“校準”。這為工程師提供了一個單一的不確定性數字和改進的精度性能,LEM-6可以安裝在19英寸機架上,并且可以采用1?6相配置。
模型的細節
LEM6-1 1通道PPA - > LEM IT / ITN接口
LEM6-2 2通道PPA - > LEM IT / ITN接口
LEM6-3 3通道PPA - > LEM IT / ITN接口
LEM6-4 4通道PPA - > LEM IT / ITN接口
LEM6-5 5通道PPA - > LEM IT / ITN接口
LEM6-6 6通道PPA - > LEM IT / ITN接口
規格數據
LEM-6接口PDF 2018年2月
兼容的傳感器
IT60-S-S IT1000
IT65-S-S ITN600
IT200-S-S ITN900
IT205-S-S ITN1000
IT400-S LF510-S
IT405-S-S LF1010
IT605-S-S LF2010
IT700-S LF510 / 1010 PSU
N4L HF系列電流分流器
HF100 + HF200 + HF500高頻阻性電流分流器
N4L電阻電流分流器為工程師提供了廣泛的電流測量選項。范圍跨度從1Arms額定值HF01A到500Arms HF500,HF01A提供低至500mA RMS的精確電流測量。
型號額定電流
HF01A 100uA→1Arms
HF003 200uA→3Arms
HF006 1mArms→6Arms
HF020 10mArms→20Arms
HF100 100mA→100Arms
HF200 200mA→200Arms
HF500 500mA→500Arms
規格數據
RF分流PPA
HF100_200固定螺栓導軌
HF500固定螺栓導軌
HF500 - 熱特性
N4L高頻羅戈夫斯基電流傳感器
WR5000 Rogowski電流傳感器
N4L高頻羅果夫斯基電流變送器可根據所選型號提供高達30,000A的電流。我們的兩款標準型號提供1A→5,000A(WR5000)和2A→10,000A(WR10000)動態測量范圍。
型號額定電流
WR5000 1A→5,000A
WR10000 2A→10,000A
規格數據
WR5000 Rogowski_Issue 2.0
WR10000 Rogowski_Issue 2.0
其他型號可根據要求提供
LEM高精度零磁通電流傳感器
無題1
N4L很高興提供LEM系列零通量電流測量傳感器,該傳感器目前正與零流量測量技術一起使用,以提供高達1,000Apk的高精度電流測量
型號額定電流
IT60-S→60Adc / pk 42Arms
IT65-S→85Apk 60Arms
IT200-S→200Adc / pk 141Arms
IT205-S→283Apk 200Arms
IT400-S→400Adc / pk 282Arms
IT405-S→566Apk 400Arms
IT700-S→700Adc /包495Arms
IT1000-S→1000Adc / pk 707Arms
IT605-S→849Apk 600Arms
ITN600-S→600Adc /包424Arms
ITN900-S→900Adc /包636Arms
ITN1000-S→1000Adc /包707Arms
IN2000-S→3000Apk 2000Arms
LF510-S→500Arms 0.6%(系統校準0.1%)AC + DC
LF1010-S→1000Arms 0.4%(系統校準0.1%)AC + DC
LF510 / 1010 PSU兼容電源
LEM-6 1-6通道LEM CT接口系統
規格數據
LEM - IT 60-S
LEM - IT 65-S
LEM - IT 200-S
LEM - IT 205-S
LEM - IT 400-S
LEM - IT 405-S
LEM - IT 700-S
LEM - IT 1000-S
LEM - IT 605-S
LEM - ITN 600-S
LEM - ITN 900-S
LEM - ITN 1000-S
LEM - IN-2000-S
LEM - LF510-S
LEM - LF_1010-s
N / A
LEM-6接口PDF
這些設備可用作電流輸出傳感器,電壓輸出傳感器可根據要求提供
AC + DC電流鉗位
AC + DC電流鉗用于功率分析
我們的AC + DC電流鉗位范圍提供高達5000A(P50-3C)的電流測量,并具有上限
Power Analyzer Accessories
Analogue Input/Output
ADI40 40 Channel Analogue<>Digital I/O Interface | ||||||||||||||||||||||||
The ADI40 extends the versatility of the N4L Precision Power Analyzers (PPA3500, PPA4500 and PPA5500), collecting a multitude of DC measurements and streaming the data digitally to the Power Analyzer. Featuring 4x direct thermocouple inputs (type J or type k), 16x analogue DC inputs and 20x analogue DC outputs. Analogue outputs can be mapped to any PPA measured parameter, as well as the 16x analogue inputs. More detailed information on the ADI40 can be found here
|
Current Measurement
N4L LEM-6 Interface | ||||||||||||||||||||||||||||||||||||
N4L LEM-6 Interface serves as a high accuracy, highly stable interfacing unit allowing simple “plug and play” connection of any N4L PPA to the LEM IT and ITN current transducers. The LEM-6 supplies the LEM transducer with a highly stable isolated supply voltage, each channel is isolated from the next providing excellent cross channel coupling immunity. There are 4x current shunts per channel, ranging from 1Ω ~ 10Ω, this ensures the transducer can be utilized accuray throughout its dynamic range without the introduction of noise into the measurement. If the LEM-6 is purchased with an N4L power analyzer and LEM transducers, the LEM-6 Interface can be “system calibrated” within N4L’s ISO17025 UKAS laboratory. This provides the engineer with a single uncertainty figure and improved accuracy performance, the LEM-6 is 19in rack mountable and available in 1~6 phase configurations.
|
N4L HF Series Current Shunts | ||||||||||||||||||||
N4L Resistive Current Shunts provide the engineer with a wide range of current measurement options. The range spans from the 1Arms rated HF01A to the 500Arms HF500, the HF01A provides accurate current measurement down to 500uA RMS.
|
N4L High Frequency Rogowski Current Transducers | |||||||||||
N4L High Frequency Rogowski Current Transducers provide current measurement from 1A up to upwards of 30,000A depending upon the model selected. The two standard models in our range provide 1A → 5,000A(WR5000) and 2A → 10,000A(WR10000) dynamic measurement ranges.
Other models available upon request |
LEM High Accuracy Zero Flux Current Transducers | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
N4L are pleased to offer the LEM range of Zero flux current measurement transducers, these current sensors based upon the Zero Flux measurement technique provide high accuracy current measurement up to 1,000Apk
These operate as current output transducers, voltage output transducers are available upon request |
AC+DC Current Clamps | ||||||||||||||||||||
| Our AC+DC Current Clamp range provide current measurement up to 5,000A (P50-3C) with an upper bandwidth of 5kHz (SC3C), these current clamps offer a convenient method of measurement for applications where the DC component of a signal is of particular interest. For example, these clamps are ideally suited to measurement of the DC bus in an inverter drive.
Other models available upon request |
AC Current Clamps | ||||||||||||||||||||||||||||||||
| Our AC Current Clamp range provide current measurement up to 3,000A (P32-UE) with an upper bandwidth of 15kHz (SMUB), these current clamps offer an accurate measurement of an AC signal over a wide bandwidth. Typical applications include PWM Invert Driver output power measurement, transformer loss testing and a range of other AC applications. The wideband response of these current clamps is very flat well beyond the stated frequency range, these AC current clamps offer an ideal solution where cost and convenience must be accompanied with sufficient accuracy.
Other models available upon request |
Voltage Measurement
TT-HV-250 High Voltage Probe (2.5kVpk) | ||||||||||
Although N4Lpower analyzers feature 3000Vpk (PPA4500 and PPA5500) and 2500Vpk (PPA500 and PPA1500) voltage inputs, a particularly useful feature of all N4L power analyzers is the 3Vpk BNC inputs situated on both the voltage and current channels. This results in the ability to measure 6 x high voltage signals (with attenuators on external inputs) on a 3 Phase instrument, in this case the three current channel “External Inputs” could be used to measure a voltage via an input attenuator such as the TT-H 50.
Other models available upon request |
TT-HVP-15HF High Voltage Probe (15kVpk, 10kVrms) | ||||||||||
The TTV-HVP-15HF High Voltage Probes allows any of our power analysers to be connected to signals up to 15kV, this is particularly useful for voltage measurement of power line applications, the high voltage probes is connected to the power analyzer via the Vext BNC connection on the instrument, the probe is then enabled in the RANGE menu of the power analyser.
Other models available upon request |
ULCP Ultra Low Capacitance Probe (1kVrms) | |||||||||||||
The ULCP ultra low capacitance probe is intended for voltage measurement of d es which are particularly sensitive to capacitive loading. This is particularly useful when measuring start up characteristics of low power lighting ballasts, the ULCP Ultra Low Capacitance Probe utilises a differential input design that provides a capacitance to ground of 1pF.
Other models available upon request
| |||||||||||||
HVDP High Voltage Probe (7kVpk / 5kVrms) | |||||||||||||
The HVDP series high voltage differential probes are designed to maintain a precise attenuation value over a wide frequency range.The active circuitry provides a low impedance output which does not need to be trimmed to adjust to the characteristics of the measurement input.
|
Spare N4L PPA Voltage Connection Lead Set (Supplied as standard with instrument) | |||||||||||
All N4L Power Analyzers are supplied with the necessary voltage and current connection leads in order to make measurements “out of the box”. It may be the case that the supplied lead set has been damaged/gone missing, in these situations it is possible to order a replacement lead set.
Other lead lengths available upon request |
Test D e Interfaces
Single Phase Universal 10Arms Breakout Box | ||||||||
The 10Arms Single Phase Universal breakout box is a convenient solution to single phase power measurement of domestic appliances. The breakout box features a universal CE compliant shuttered outlet for connection of a range of sockets. The 4mm safety connectors offer seamless connection to any of the N4L power analyzer range.
|
19in Rack Mount Kits
PPA5/15xx Rack Mount Kit | ||||||||
| At only 2U high, the PPA500 and PPA1500 power analyzers offer exceptional accuracy at this form factor. The PPA500/PPA1500 rack mount kit provides the ability to perform 6 phase 0.1% accurate power measurement whilst only occupying a height of 2U in any rack. This l of accuracy is not available from any other manufacturer at this form factor*.
*according to N4L market research July 2014
|
PPA45/55xx Rack Mount Kit | ||||||
The PPA4500/5500 rack mount kit consists of two 19in rack mounting brackets providing simple integration into any EIA standard 19in rack system. The brackets are fitted to the Power Analyzer by removing the two handle fixtures situated on each side of the power analyser.
|
Attenuators
ATT Series Attenuators | ||||||||||||||||||||||
The ATT10, ATT20 and ATT1000 are BNC to BNC voltage attenuators designed for the PPA Vext and Aext inputs. They provide high accuracy wide bandwidth gain, typical applications are in situations when the output of a voltage attenuator (such as the TT-H 50) is above the 3Vpk range of the voltage channel external input.
|
Torque and Speed Input Isolation | ||||||||
The PPA4500/5500 feature torque and speed inputs fitted as standard, both inputs are ground referenced and in certain circumstances where grounding is an issue an isolated torque and speed input is required.
|
Extension Port Accessories
PCIS Phase Controlled Inrush Switch | ||||||||||
The Phase Controlled Inrush Switch provides the engineer with the ability to “program” the phase angle of the input power waveform at which power is applied to any DUT. The PCIS allows the user to pre program 0º, 45º, 90º, 135º, 180º, 225º, 270º and 315º. This function is particularly useful when testing the inrush current of which is either inductive or capacitive, allowing “worst case” phase angles to be applied to the e under test.
|
Communication Accessories
GPIB515 | ||||||||||
The GPIB515 Accessory makes a GPIB link available to the PPA500 and PPA1500 Instrument range, this is ach d through a serial link to the PPA that handles all necessary status lines and registers for IEEE488 Communication.
|
Carry Cases
PPA500/PPA1500 Carry Case | ||||
The N4L PPA500/PPA1500 Aluminium carry cases offer ruggedness in a lightweight package, providing the engineer with the ability to transport the Power Analyzer via freight or an aircraft hold. The Aluminium design offers protection whilst the CNC machined foam inserts secure the instrument in place.
|