當前位置:浙江米勒潔凈設備科技有限公司>>隔膜閥系列>>手動隔膜閥>> U型三通隔膜閥
應用:產品廣泛應用于制藥、乳品、食品、釀酒、飲料、精細化工等潔凈管路系統;
閥體材質:與液體接觸部分材質一般為不銹鋼316L;其他配件為304材質;
規格:ф10- ф159;
無菌隔膜閥的結構形式與一般閥門很不相同,它是依靠柔軟的橡膠?;蛩芰夏?lái)控制流體運動的。其工作原理見下圖。常用的無菌隔膜閥材質分為不銹鋼304材質,不銹鋼316L材質。
衛生級無菌隔膜閥價格,不銹鋼無菌隔膜閥廠家;
無菌隔膜閥安裝與維護
①隔膜閥安裝前應仔細核對管路的運行條件是否與本閥規定的使用范圍相符,并應清洗內腔,以防止污物卡阻或損傷密封部件。
②橡膠襯里層和橡膠隔膜表面切勿涂刷油脂類物品,以防橡膠溶脹,影響隔膜閥使用壽命。
③手輪或傳動機構,不允許作起吊用,并嚴禁碰撞。
④手動操作隔膜閥時,不得借助于輔助杠桿,以防扭力過大而損傷驅動部件或密封部位。
⑤隔膜閥應存放在干燥通風的室內,嚴禁堆放,庫存隔膜閥的兩端通道必須封口,且啟閉件應處于微開啟狀態。
無菌隔膜閥;衛生級無菌隔膜閥價格;不銹鋼無菌隔膜閥廠家;
英文產品介紹:
Installation and maintenance of aseptic diaphragm valves① diaphragm valve installation should carefully check the running condition of the pipeline is consistent with the use of the provisions of the valve cavity and should be cleaned to prevent dirt jamming or damage the sealing parts.② rubber lining and rubber diaphragm surface not brushing the items of fats and oils, to prevent rubber swelling, affecting diaphragm valve service life.(3) hand wheel or transmission, does not allow for the lifting, and are prohibited from the collision.④ Manually Operated Diaphragm Valves, not by means of the auxiliary lever to prevent torque damage drive components or sealed parts.⑤ diaphragm valves should be stored in dry and ventilated room, is strictly prohibited stacked, stock diaphragm valves at both ends of the channel must be sealed, and open and close in a micro open.Diaphragm: the diaphragm is generally PTFE; EPDM mixed diaphragm; market ordinary diaphragm valve diaphragm commonly used food silicone, the scope of its work temperature <= 80 °;PTFE and EPDM diaphragm temperatures up to 150 ° range, the effect of high temperature sterilization, to ensure that the medicinal and food security.
隔膜片:無菌隔膜閥隔膜片采用無菌PTFE;EPDM混合膜片;市場上普通隔膜閥的膜片一般采用食品硅膠,其工作范圍溫度<=80°;
PTFE和EPDM混合膜片一般溫度可達150°工作范圍,達到高溫滅菌的效果,保證藥用和食品安全。