一.主要用途：
1.醫藥：壓片顆粒，膠囊填充顆粒等；
2.食品：食品制造用顆粒、調味顆粒等。
3.塑料：各種塑料成型顆粒；
4.化工：催化劑、顏料、洗滌劑等顆粒。該機制成的顆?？梢詨浩瑒?，做沖劑，灌膠囊等。該機主要用于制藥、食品、化工和其它行業造粒。特別適用于濕法無法解決的物料進行造粒。
二.特點：
1. 干粉顆粒密度均勻，崩解度好，成料率高。
2. 特殊的送料結構，保證有效送料。
3.軋輥水循環冷卻，保證不會出現物料粘輥現象。
4. 不需要水或乙醇等潤濕劑，不需要二次加熱干燥、工序本底
5. 采用*的電動液壓，操作簡單可靠，自動化程度高。
6. 密封操作無污染，滿足藥品衛生要求。
7. 特別適用于濕法無法解決的物料造粒。
三.工作原理:
該機是利用物料中的結晶水，直接將粉料制成顆粒的新設備。該機結構新穎合理，性能穩定可靠，清洗維修方便。
技術參數：
| 型號 | GK70型 | GK120型 |
| 生產能力（kg/h） | 20-60 | 60-200 |
| 進料粒度（mm） | 0.4-5 | 0.4-5 |
| 電機總功率（KW） | 7.15 | 13.75 |
| 外形尺寸（長×寬×高）（mm） | 1380×850×2200 | 1850×1100×2600 |
| 工作壓力（Mpa） | 198 | 294 |
| 重量（kg） | 1600 | 2000 |
A major purpose:
Medicine: 1 tablet granule, capsule filling particles;
2 food: food manufacturing, flavoring particles with particles.
3 plastic: various plastic molding pellets;
The 4 Chemical: catalyst, pigment, detergent and other grains. The mechanism of particles can be compressed tablet, capsule, granule do. The machine is mainly used in pharmaceutical, food, chemical and other industries granulating. Especially suitable for wet method can not solve the material granulator.
Characteristics of two:
1 dry particles of uniform density, disintegration, high rate of finished material.
2 special feeding structure, ensure the effective feeding.
3 roll water cooling, ensure there is no material sticking phenomenon.
4 don't need water or ethanol, wetting agent, do not need two heating and drying processes, the bottom
5 the use of advanced electric hydraulic, simple and reliable operation, high degree of automation.
The 6 sealing operation without pollution, meet the health requirements for drugs.
7 special suitable for wet method can not solve the granulation of materials.
Three. Working principle:
The machine is the use of crystal water in material, will direct the powder into granules of new equipment. This machine is novel and reasonable structure, stable and reliable performance, convenient cleaning and repair.
Technical parameters:
Model GK70 GK120
Production capacity （ kg/h ） 20-60 60-200
Feeding size （ mm ） 0.4-5 0.4-5
Total motor power （ KW ） 7.15 13.75
Dimensions （ length * width * height ） （ mm ） 1380 x 850 x 22001850 x 1100 x 2600
Working pressure （ Mpa ） 198294
Weight （ kg ） 16002000
采購中心
